Program 29: Balloon Bananza!

I felt it was time for our G3 scientists to once again have some fun with balloons. Not only are balloons a pile of fun, but they help us learn a lot about science! In fact, in just this one program our G3 scientists learned a little about:

  1. The Properties of Polymers
  2. Centripetal Force
  3. Friction
  4. Newton’s 3rd Law of Motion

We started the program with a quick discussion about the properties of polymers. In particular, how the rubber in balloons is made of long strands of molecules called polymers. And it is the elastic quality of the polymers that allows the balloon rubber to stretch. Our conversation then turned to centripetal force and friction. The word “centripetal” is actually Latin for “center seeking.” And that truly describes this force. Without centripetal force, objects would not be able to travel in a circular path (they would only be able to travel in a straight path). One example is how a satellite orbits the earth. In this case, the centripetal force is supplied by earth’s gravity (think of it like an invisible thread that links the earth to the satellite and keeps the satellite moving around the earth in a circular orbit). Another example is the swings ride at an amusement park, where the centripetal force is supplied by the chains that link the chairs to the central pole. I shared my favorite video with the groups. In the following video, Jeff Williams on the International Space Station (ISS), shows that, due to centripetal force, the bubbles in his iced tea package move to the center of the package and form a large, singular air bubble when the package is put into a circular path.

EXPERIMENT #1:  The Balloon Skewer, or what I call, “Balloon on a Stick”

Materials:

  • Clear balloons are a must (a bought a package of 70+ at a party store)
  • Wooden skewers (the longer the better – again I found some at a party store, but I suspect some grocery stores have them as well)
  • Some liquid vegetable oil in a cup

This is definitely an experiment designed to impress a crowded room 🙂 Thanks to my favorite scientist Steve Spangler, I impressed our scientists with a demonstration from his web site called The Balloon Skewer. By coating a standard bamboo skewer with vegetable oil (for lubricant), you can push the skewer in one side of the balloon and out the other side…without popping it!  [The trick is making sure the entry/exit points are where the balloon’s rubber is LEAST stressed, or more opaque looking then the rest of the balloon – near the base where you tied off the balloon, and at the opposite end and top point of the balloon.]  Each G3 scientist was given a clear balloon and a skewer to try their hands at this demonstration. An important early step is inflate the balloon as large as you dare, and then release 1/3-1/2 of the air before you tie off the balloon. This actually helps stretch out the polymers and gives you a better chance at success when you aim to slip the wooden skewer between the polymer chains and through the balloon itself. The vast majority of our scientists were a success…though the sounds of popping balloons could be heard here and there throughout the room.  Practice makes perfect!

Experiment #2:  The Spinning Penny

Materials:

  • Clear balloons are a must
  • One penny per person

With our next experiment, we had a chance to see centripetal motion at its best. The Spinning Penny is an experiment described on the Steve Spangler’s web site. The experiment itself is very simple. A single penny is placed inside a clear balloon. The balloon is inflated and tied off with the penny still inside.  After shaking the penny a bit, the balloon is then swirled to help start the penny on a circular path inside the balloon itself. Due to the limited amount of friction, the penny can stay on its circular path for close to 30 seconds before gravity begins to slow it’s path! Our scientists all managed to create this very cool demonstration of centripetal force. [Special Note:  It is important that the balloon is pointing toward the floor as well as your eyes when you inflate it – there is a danger of a choking hazard if you choose to tip the balloon above our head to inflate with the penny inside!]

Experiment #3:  The Screaming Balloon

Materials:

  • Clear balloons are a must
  • One zinc hex nut per person (though any size works fine, we used a 1/4 inch diameter nut)

This experiment is actually a fun variation to The Spinning Penny. For The Screaming Balloon, we replaced the penny with a zinc hex nut…and guess what? The nut also moves on a circular path within the balloon due to the centripetal force we supply, but there is more friction between the hex nut and the balloon thanks to the the shape of the nut, and thus we get a high-pitched whining sound! Very fun for us…maybe not so fun for friends and family 🙂

Experiment #4:  Balloon Rockets

Materials:

  • Any balloons will do (we made sure everyone used the same size balloon for fairness since we did some mini races)
  • String
  • Straws (if you have the bendy kind, you can just cut off the bendy portion)
  • Tape (any kind will do, though masking tape proved a little easier to work with)
  • Chairs

What better way to see Newton’s 3rd Law of Motion in action than some friendly competition with balloon rockets! According to Sir Isaac Newton and his 3rd Law of Motion,

For every action, there is an equal and opposite reaction

To test this principle, we followed the guidelines of Science Bob to create our very own balloon rockets. We divided our group of scientists into 2 teams, and each team assembled a rocket “track” – a pair of chairs with some kite string strung between them (like a zip line). A straw was threaded onto each string. Each scientist received a colored balloon (clear is not necessary for this experiment), and was instructed to inflate the balloon as large as they wanted without tying it off. While pinching the open end of the balloon closed, the balloon is held under the straw and taped to it (with the mouth of the balloon pointing in the opposite direction that you want the balloon to travel in). When you’re ready to the see the balloon in action, you just unpinch the mouth of the balloon and let go! The result mimics the take-off of a rocket, with the air pushing back in one direction and propelling the balloon in the opposite direction. We had some friendly competition to see which team’s balloon would travel the farthest. Every scientists received a small prize for their efforts 🙂

At the end of our hour, every scientist was able to bring a copy of these simple demonstrations and experiments home with them.  Below is a nifty video showing our scientists’ efforts during all of the balloon experiments. Until next time!…

Advertisements
Categories: Forces, Motion, Polymers | Tags: , , , , , , , | Leave a comment

Post navigation

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Create a free website or blog at WordPress.com.

%d bloggers like this: